Select Language
Inquiry Basket ( 0 )
Company Details
  • Qingdao Bosheng building materials Co., Ltd

  •  [Shandong,China]
  • Business Type:Manufacturer

Qingdao Bosheng building materials Co., Ltd

Home > News > Kindergarten plastic floor maintenance and maintenance?

News

Kindergarten plastic floor maintenance and maintenance?

2020-11-21

First, the kindergarten Plastic Floor cleaning maintenance purpose
1. Improve appearance: timely remove dirt generated in daily use to make the floor fully show its appearance and natural gloss.
2. Protect the floor: make the elastic floor from the erosion of chemicals, cigarette marks, shoe prints, oil and water, etc., reduce the surface wear to a minimum, so that the durability of the floor itself can be played, thereby extending the service life of the floor.

3. Convenient nursing: due to the compact surface structure and special treatment of elastic floor itself, pay attention to daily cleaning and maintenance, which can make the floor easier to care and prolong its service life.

Two, the kindergarten Plastic floor care matters needing attention
1. All kinds of dirt on the ground should be removed in time.
2. Prohibit to immerse the floor in bright water, although some ground USES waterproof glue to cut off water source (be like the place such as floor drain, water room) but long by water immerse, can affect the service life of the floor seriously.
In the cleaning process, use water suction machine to drain the sewage in time.
3. For more people flow, wear bigger place should shorten the maintenance cycle, increase the wax wax of high strength surface number.
4. It is forbidden to use hard and rough cleaning utensils (such as steel ball, baijie cloth, etc.) to prevent sharp objects from colliding with the elastic floor.
5. It is highly recommended to place floor MATS at the entrance of public places with high human flow to prevent dirt, sand and other dirt and scratches on the ground.
Three, the kindergarten plastic floor at different stages of maintenance methods
Clean and maintain the plastic floor of the kindergarten after laying/before using
1. Remove the dust and sundries on the floor surface first.
Remove protective wax, grease, dust and other dirt on the floor surface by adding 3M red abraser or similar products at a low speed (dilute with strong general cleaner 1:20 and add into the cleaner), and drain the sewage with water absorbent.
3. Wash and drain with clean water.
4. Apply 1-2 layers of strong face wax as required.
Kindergarten plastic floor daily cleaning and maintenance
1. Push or vacuum.
Drag dust agent on the ground, dry dust pushing.
2. Wet mop.
With floor clean glazing agent by 1:20 diluted with water, mop the floor with a semi-wet mop.
If necessary, wash at low speed with WASH&Shine using a wiper.
Kindergarten plastic floor regular cleaning and maintenance
1. Push or vacuum.
2. The floor cleaning and polishing agent shall be diluted with water at 1:20, and the floor shall be mopped or washed with a high speed polishing machine and a red abrasive disc.
3. Apply 1-2 layers of strong wax.
4. If necessary, it can be polished with high-speed polishing machine and white polishing pad.
The plastic floor of the kindergarten is completely renovated
1. Push or vacuum.
2. Dilute with 1∶10 strong dewaxing water and spread evenly on the ground. Wait for 510 minutes.
Use water suction machine to drain the sewage in time.
3. Wash with clean water and drain until there is no residual detergent left on the floor.
4. Apply 1-2 layers of strong face wax as required.
Special dirt treatment of plastic floor in kindergarten
1. Oil pollution: local oil pollution, put the original liquid of water-based oil remover directly on the towel to wipe;
Large area of oil, dilute the special water-based oil remover by 110, use the floor cleaner and red grinding pad to clean at low speed.
2. Black offset printing: it is polished with spray cleaning maintenance wax combined with high speed polishing machine and white polishing pad.
For a long time of black offset printing, you can put the strong black offset printing remover directly on the towel to wipe processing.
3. Glue or gum: Wipe with professional strong glue remover directly onto towel.

Share to:  
Previous: The development trend of PVC floor Next: Plastic floor will be the only direction of the development of home decoration floor
Communicate with Supplier?Supplier
Abby Ms. Abby
What can I do for you?
Contact Supplier